Polygard-CN 筒式过滤器 30 in.10.0 μm 7 号乙丙橡胶

品牌

Millipore

货号

CN1H73E06

包装型号

规格纯度

pore size 10.0 μm, cartridge nominal length 30 in. (75 cm), Code 7 (2-226; O-rings w/locking-tabs)

参考价格

22722 元 *本价格含增值税费

促销

数量

产品名称：

Polygard^® CN Cartridge Filter
Polygard-CN Cartridge Filter 30 in. 10.0 μm Code 7 Ethylene-Propylene
Polygard-CN 筒式过滤器 30 in.10.0 μm 7 号乙丙橡胶

产品介绍：

产品说明

一般描述

Device Configuration: Cartridge

制备说明

Sterilization Method
10 autoclave cycles or SIP @ 126 °C for 30 min
Sanitization Protocol
30 min with hot water @ 80 °C

分析说明

Gravimetric Extractables: after 24-h soak in water
Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥15 L

其他说明

Directions for Use

Organism Retention: Microorganism reduction
Mode of Action: Filtration (nominal)
Application: BioProcessing
Intended Use: Efficient particle and microorganism reduction
Instructions for Use: Please refer to the Polygard^® and CLARIGARD^® Cartridges user guide
Storage Statement: Store in dry location
Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

法律信息

CLARIGARD is a registered trademark of Merck KGaA, Darmstadt, Germany
POLYGARD is a registered trademark of Merck KGaA, Darmstadt, Germany

基本信息

eCl@ss

32031690

产品性质

物料	EPR seal polypropylene
质量水平	400
特点	hydrophilic
manufacturer/tradename	Polygard
参数	4.8 bar max. differential pressure (70 psid) at 25 ℃ 4.8 bar max. inlet pressure (70 psi) at 25 ℃
cartridge nominal length	30 in. (75 cm)
直径	7.0 cm (2.75 in.)
过滤面积	1.26 m²
杂质	≤0.5 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)
gravimetric extractables	≤150 mg
孔径	10.0 μm nominal pore size 10.0 μm pore size
input	sample type liquid
cartridge code	Code 7 (2-226; O-rings w/locking-tabs)

Polygard® CN Cartridge Filter