产品说明
一般描述
Device Configuration: lab scale Pod
应用
High-density cell cultures
产品规格
Filter Grade: 20MS
制备说明
Sterilization Method
Integrity is maintained after 2 autoclave cycles of 60 minutes at 123 °C.
分析说明
Total organic carbon (TOC) residue: Post autoclave (1 cycle of 60 minutes at 123 °C) and flushed at a flux rate of 600 LMH pure water flush for 10 minutes. At the end of the flush, a sample was pulled for TOC typical values.
法律信息
CLARISOLVE is a registered trademark of Merck KGaA, Darmstadt, Germany
MILLISTAK+ is a registered trademark of Merck KGaA, Darmstadt, Germany
基本信息
| eCl@ss | 32031690 |
| NACRES | NB.24 |
产品性质
| 质量水平 | 400 |
| 物料 | Millistak+® media TPE seal polypropylene |
| manufacturer/tradename | Clarisolve® |
| 参数 | 2.1 bar max. differential pressure (30 psid) at 37 ℃ (Forward) 2.1 bar max. differential pressure (30 psid) at 37 ℃ (Maximum) 2.1 bar max. differential pressure (30 psid) at 37 ℃ (Reverse) 2.1 bar max. differential pressure (30 psid) at 4 ℃ (Forward) |
| 高度 | 14 cm (5.3 in.) |
| 长度 | 22 cm (8.5 in.) |
| 宽度 | 9.4 cm (3.7 in.) |
| 过滤面积 | 0.027 m2 |
| 杂质 | <0.25 EU/mL (LAL test, Aqueous extraction; on filter media only) |
| total organic carbon (TOC) residue | 1.4-2.1 μg/L |
| input | sample type liquid |
| 电导率 | 0.80 – 1.59 μS/cm (product water; post autoclave (1 cycle of 60 minutes at 123 ℃) and flushed at a flux rate of 600 LMH pure water flush for 10 minutes. A sample of filtrate was pulled every 2 minutes during flush and tested for conductivity.) |
| 运输 | ambient |
安全信息
| 储存分类代码 | 13 - Non Combustible Solids |
| WGK | nwg |
| 闪点(F) | Not applicable |
| 闪点(C) | Not applicable |

Sigma-Aldrich
