产品名称:
HIRMA PMMA 3D Printing Filament
产品介绍:
产品说明
一般描述
HIRMA PMMA 3D printing filament:
- A lightweight thermoplastic that can be made transparent through acetone or particular resins
- Modified PMMA is able to achieve high scratch and impact resistance
- A good UV resistance makes it suitable for outdoor uses
- PMMA is an easier to print alternative to PC
Material Properties
- Density: 1.17 g/cm3
- Water absorption: 0.4%
- Flexural modulus: 2.3 GPa
- Tensile strengh at break: 51 MPa
- Heat deflection: 77 ℃
- IZOD impact: 3.2 J/cm
应用
HIRMA PMMA 3D Printing Parameters:
- Extruder (nozzle) temperature: 230 +/-10 ℃
- Bed temperature: 100 +/-10 ℃
- Print speed: 30-50 mm/s
- Fan: 0-20 %
- Minimum nozzle diameter: 0.3 mm
- Plate materials: kapton tape with glue, blue tape with glue, etc.
基本信息
产品性质
安全信息
储存分类代码 | 11 - Combustible Solids |
WGK | nwg |
闪点(F) | Not applicable |
闪点(C) | Not applicable |