产品说明
一般描述
Device Configuration: 取样皿滤膜
其他说明
These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
Directions for Use
制备说明
Sterilization Method
3 autoclave cycles of 60 min @ 126 °C
分析说明
Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥100 mL
法律信息
MILLIPORE EXPRESS is a registered trademark of Merck KGaA, Darmstadt, Germany
OPTISCALE is a registered trademark of Merck KGaA, Darmstadt, Germany
基本信息
eCl@ss | 32031690 |
产品性质
质量水平 | 400 |
物料 | PVDF vent cap fluoroelastomer FKM seal polycarbonate polyethersulfone polypropylene support |
reg. compliance | meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials) |
特点 | hydrophilic |
manufacturer/tradename | Millipore Express® |
参数 | 25 ℃ max. inlet temp. 5.5 bar max. inlet pressure (80 psi) at 25 ℃ 80 psig max. inlet pressure |
长度 | 7.4 cm (2.91 in.) |
cartridge nominal length | 2.91 in. (74 mm) |
直径 | 6.9 cm (2.7 in.) |
过滤面积 | 17.7 cm2 |
inlet connection diam. | 3/4 in. |
outlet connection diam. | 3/4 in. |
基质 | Millipore Express® SHC |
pore size | 0.5/0.2 μm pore size |
bubble point | ≥4000 mbar (58 psig), air with water at 23 ℃ |
配件 | inlet sanitary flange 19 mm ( outlet sanitary flange |