产品说明
一般描述
Device Configuration: 取样皿滤膜
其他说明
These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
Directions for Use
制备说明
Sterilization Method
3 autoclave cycles of 60 min @ 126 °C
分析说明
Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥100 mL
法律信息
MILLIPORE EXPRESS is a registered trademark of Merck KGaA, Darmstadt, Germany
OPTISCALE is a registered trademark of Merck KGaA, Darmstadt, Germany
基本信息
| eCl@ss | 32031690 | 
产品性质
| 质量水平 | 400 | 
| 物料 | PVDF vent cap fluoroelastomer FKM seal polycarbonate polyethersulfone polypropylene support  | 
| reg. compliance | meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials) | 
| 特点 | hydrophilic | 
| manufacturer/tradename | Millipore Express® | 
| 参数 | 25 ℃ max. inlet temp. 5.5 bar max. inlet pressure (80 psi) at 25 ℃ 80 psig max. inlet pressure  | 
| 长度 | 8.2 cm (3.24 in.) | 
| cartridge nominal length | 3.24 in. (82 mm) | 
| 直径 | 6.9 cm (2.7 in.) | 
| 过滤面积 | 17.7 cm2 | 
| inlet connection diam. | 3/4 in. | 
| outlet connection diam. | 1/4 in. | 
| 基质 | Millipore Express® SHF | 
| 孔径 | 0.2 μm nominal pore size 0.2 μm pore size  | 
| bubble point | ≥4000 mbar (58 psig), air with water at 23 ℃ | 
| 配件 |  inlet sanitary flange 19 mm ( outlet hose barb 6 mm (  | 

Sigma-Aldrich
