Millipore Express <TMSYMBOL></TMSYMBOL> SHF 筒式过滤器 5 in.0.2 μm 7 号 EPDM

产品名称：

Millipore Express^® SHF Cartridge Filter
Millipore Express SHF Cartridge Filter 5 in. 0.2 μm Code 7 EPDM
Millipore Express SHF 筒式过滤器 5 in.0.2 μm 7 号 EPDM

产品介绍：

产品说明

一般描述

Device Configuration: Cartridge

包装

Double Easy-Open bag

其他说明

These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
Directions for Use

Organism Retention: Microorganism
Mode of Action: Filtration (size exclusion)
Application: BioProcessing
Intended Use: Reduction or removal of microorganism/bioburden
Instructions for Use: Please refer wetting instructions of Filters with MILLIPORE EXPRESS^® Membrane user guide
Storage Statement: Please refer Filters with MILLIPORE EXPRESS^® Membrane user guide
Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

制备说明

This product was manufactured with a Millipore Express^® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).
Sterilization Method
25 forward or 22 forward and 3 reverse SIP cycles of 30 min @ 135 °C; 25 autoclave cycles of 60 min @ 126 °C

分析说明

Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥1 L
Bacterial Retention
Samples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM^® F838 methodology.
TOC/Conductivity
After sterilization and a controlled water flush of 5.5 L, samples exhibited less than 500 ppb TOC per USP <64> and less than 1.3 µS/cm per USP <64> at 25 °C.

法律信息

ASTM is a registered trademark of American Society for Testing and Materials
Emprove is a registered trademark of Merck KGaA, Darmstadt, Germany
MILLIPORE EXPRESS is a registered trademark of Merck KGaA, Darmstadt, Germany

基本信息

eCl@ss

32031690

产品性质

质量水平	400
物料	EPDM rubber seal polyethersulfone polypropylene polypropylene support polysulfone
reg. compliance	meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
产品线	EMPROVE^® Filter
特点	hydrophilic
manufacturer/tradename	Millipore Express^®
参数	≤16.4 mL/min air diffusion at 2.75 bar (40 psig) and 23 ℃ (in water) 0.07 bar max. inlet pressure (1 psi) at 135 ℃ (Reverse) 0.35 bar max. inlet pressure (5 psi) at 135 ℃ (Forward) 1.7 bar max. inlet pressure (25 psi) at 80 ℃ (Forward) 1700 bar max. differential pressure (25 psi) at 80 ℃ (Forward) 2.07 bar max. inlet pressure (30 psi) at 25 ℃ (Reverse) 2100 mbar max. differential pressure (30 psi) at 25 ℃ (Reverse) 340 mbar max. differential pressure (5 psi) at 135 ℃ (Forward) 69 mbar max. differential pressure (1 psi) at 135 ℃ (Reverse) 6900 mbar max. differential pressure (100 psi) at 25 ℃ (Forward) 7 bar max. inlet pressure (100 psi) at 25 ℃ (Forward)
cartridge nominal length	5 in. (12.5 cm)
直径	6.9 cm (2.7 in.)
过滤面积	0.29 m²
总尺寸	5 in.
杂质	≤0.25 EU/mL bacterial endotoxins (LAL test, Aqueous extraction) <0.25 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)
基质	Millipore Express^® SHF
孔径	0.2 μm nominal pore size 0.2 μm pore size
input	sample type liquid
bubble point	≥4000 mbar (58 psig), air with water at 23 ℃
cartridge code	Code 7

Millipore Express® SHF Cartridge Filter

Millipore Express SHF 筒式过滤器 5 in.0.2 μm 7 号 EPDM

Millipore Express^® SHF Cartridge Filter