您好,欢迎来到试剂仪器网! [登录] [免费注册]
试剂仪器网
位置:首页 > 品牌 > Sigma-Aldrich > Monumental Evolution architectural 3D printing filament

Monumental Evolution architectural 3D printing filament

品牌
Sigma-Aldrich
货号
TRD3D0070
规格纯度
marble effect, diam. 1.75 mm, suitable for outdoor
参考价格
435.9 *本价格含增值税费
促销
服务
  • 原厂保证
  • 包邮
  • 增值税票
数量
-+
产品名称:
Monumental Evolution architectural 3D printing filament
产品介绍:

产品说明

一般描述

Monumental Evolution architectural 3D printing filament

  • Developed specifically for architecture, design and archeological fields.
  • Polymers are mixed with marble powders to realize architectural objects with ease.
  • Suitable for outdoor use. The new Monumental Evolution is tougher, UV resistant and with less warping.
  • Polish your objects with fine sandpaper and water. No more support-removing problems.

Material Properties
  • Density: 1.14 g/cm3
  • Tensile strength at yield: 428 kg/cm2
  • Flexural modulus: 20500 kg/cm2
  • IZOD impact strength at 23℃: 41 kg·cm/cm
  • IZOD impact strength at -30℃: 5.5 kg·cm/cm
  • Heat deflection: 100 ℃
  • Vicat softening temperature: 96 ℃

应用

Monumental Evolution 3D Printing Parameters

  • Extruder (nozzle) temperature: 240 +/- 10 ℃
  • Bed temperature: 100 +/- 10 ℃
  • Print speed: 60-70 mm/s
  • Fan: 0-25 %
  • Minimum nozzle diameter: 0.35 mm
  • Plate materials: blue tape, kapton tape, etc.

产品性质

直径1.75 mm
重量750 geach

安全信息

储存分类代码11 - Combustible Solids
WGKWGK 3
闪点(F)Not applicable
闪点(C)Not applicable

Sigma-Aldrich

推荐产品