Polymer dielectric grey for screen printing

产品说明

一般描述

This product is grey colored screen printable polymer dielectric, suitable for defining electrode areas and forms a protective layer over the electrode tracking during immersion of the electrode.

应用

Polymer dielectric grey for screen printing can be used for a variety of applications such as ink in the design of MRI receiving coils, organic light emitting diodes (OLEDs) and organic thin film transistors (OTFTs).

特点和优势

The formulation is designed for maximum flexibility.

制备说明

Screen Printing Equipment: semi-automatic, automatic.
Ink Screen Life: >3 hours
Screen Types: stainless steel, polyester mesh 156-325 tpi

• Typical Drying Conditions: Dry at 80 ℃ for 30 minutes, or 130 ℃ for 10-15 minutes in a box oven
• Suitable for Jet drying, infra-red and drying in high speed
• reel-to-reel

Clean Up Solvent: ethoxy propanol or sericol
Substrate: polyester, PVC, polycarbonate, ceramic or alumina

法律信息

Product of Gwent Electronic Materials Ltd (GEM), part of Sun Chemical Corporation

基本信息

NACRES

NA.23

产品性质

描述	Coverage: 305 cm2 per g (using a 230 mesh stainless steel screen with 13 micron emulsion) Solvent Resistance: THF − Attack Solvent Resistance: Acetone − Attack Solvent Resistance: DMAC − Attack Solvent Resistance: DMF− Attack Solvent Resistance: MEK − Full attack
形式	paste
组成	Solid content, 50-55% (at 150 ℃)
粘度	12.0-16.0 Pa.s (Haake RS1 C20/2° TiL at 230 sec-1 at 25 ℃)

安全信息

象形图
警示用语：	Warning
危险声明	H319
预防措施声明	P264 - P280 - P305 + P351 + P338 - P337 + P313
危险分类	Eye Irrit. 2
储存分类代码	10 - Combustible liquids
WGK	WGK 3
闪点(F)	191.3 °F
闪点(C)	88.5 ℃