Polygard-CN 筒式过滤器 10 in.2.5 μm 0 号 PTFE 包覆氟橡胶

品牌

Millipore

货号

CN2501T06

包装型号

6 pkg, pore size 30.0 μm, cartridge nominal length 10 in. (25 cm), Code 0 (2-222; O-rings)

规格纯度

pore size 30.0 μm, cartridge nominal length 10 in. (25 cm), Code 0 (2-222; O-rings)

参考价格

9323.63 元 *本价格含增值税费

促销

数量

产品名称：

Polygard^® CN Cartridge Filter
Polygard-CN Cartridge Filter 10 in. 2.5 μm Code 0 PTFE-encapsulated Fluoroelastomer
Polygard-CN 筒式过滤器 10 in.2.5 μm 0 号 PTFE 包覆氟橡胶

产品介绍：

产品说明

一般描述

Device Configuration: Cartridge

制备说明

Sterilization Method
10 autoclave cycles or SIP @ 126 °C for 30 min
Sanitization Protocol
30 min with hot water @ 80 °C

分析说明

Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥5 L
Gravimetric Extractables: after 24-h soak in water

其他说明

Directions for Use

Organism Retention: Microorganism reduction
Mode of Action: Filtration (nominal)
Application: BioProcessing
Intended Use: Efficient particle and microorganism reduction
Instructions for Use: Please refer to the Polygard^® and CLARIGARD^® Cartridges user guide
Storage Statement: Store in dry location
Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

法律信息

CLARIGARD is a registered trademark of Merck KGaA, Darmstadt, Germany
POLYGARD is a registered trademark of Merck KGaA, Darmstadt, Germany

基本信息

eCl@ss

32031690

产品性质

质量水平	400
物料	PTFE seal polypropylene
特点	hydrophilic
manufacturer/tradename	Polygard
参数	4.8 bar max. differential pressure (70 psid) at 25 ℃ 4.8 bar max. inlet pressure (70 psi) at 25 ℃
cartridge nominal length	10 in. (25 cm)
直径	7.0 cm (2.75 in.)
过滤面积	0.42 m²
杂质	≤0.5 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)
gravimetric extractables	≤50 mg
孔径	30.0 μm nominal pore size 30.0 μm pore size
input	sample type liquid
cartridge code	Code 0 (2-222; O-rings)

Polygard® CN Cartridge Filter

Polygard-CN 筒式过滤器 10 in.2.5 μm 0 号 PTFE 包覆氟橡胶

Polygard^® CN Cartridge Filter