产品说明
一般描述
Aquivion® PFSA ionomer membranes are melt-extruded films based on the short-side-chain (SSC) copolymer of Tetrafluoroethylene and the Sulfonyl Fluoride Vinyl Ether (SFVE) F2C=CF-O-(CF2)2-SO2F industrially produced by Solvay Specialty Polymers. Following a film hydrolysis the perfluoropolymer′s functional groups are operative in their sulfonic acid form, SO3H.
应用
Aquivion® PFSA membranes are used for electrochemical applications such as, but not limited to, polymer electrolyte fuel cells, electro-deionization systems, ozone generators, water electrolyzers, hydrogen separators and compressors, redox flow batteries as well as pervaporation or gas humidification systems.
包装
Handling Note:
Membranes are packed and sealed in a barrier protection pouch inside a cardboard box to prevent damage or deterioration. It is recommendable storing the product in a clean, humidity-controlled environment protected from direct sunlight or other sources of irradiation or heat. Sheet dimensions are based on product conditioned at 23℃ and about 50% relative humidity. They may slightly vary upon exposure to different ambient conditions. Maximum temperature rating is 230℃, overheating will result in polymer degradation, discoloration and release of toxic volatile decomposition products.
法律信息
Aquivion is a registered trademark of Solvay Group
基本信息
线性分子式 | [CF2CF(OCF2CF2SO3H)]m[CF2CF2]n |
NACRES | NA.23 |
产品性质
质量水平 | 100 |
形式 | membrane sheet |
长度 × 宽度 × 厚度 | 18 cm × 18 cm × 150 μm |
安全信息
储存分类代码 | 13 - Non Combustible Solids |
WGK | WGK 3 |
闪点(F) | Not applicable |
闪点(C) | Not applicable |
Sigma-Aldrich