您好,欢迎来到试剂仪器网! [登录] [免费注册]
试剂仪器网
位置:首页 > 品牌 > Sigma-Aldrich > Silver nano ink, aerosol jet printable

Silver nano ink, aerosol jet printable

品牌
Sigma-Aldrich
货号
908460
包装型号
规格纯度
参考价格
4186.79 *本价格含增值税费
促销
服务
  • 原厂保证
  • 包邮
  • 增值税票
数量
-+
产品名称:
Silver nano ink, aerosol jet printable
Ag ink
Air-brush printable
Room temperature storage Optomec aerosol jet printable Ag ink
产品介绍:

产品说明

应用

This product is a conductive ink based on single-crystal silver nanoparticles in a mixture of propylene glycol monomethyl ether - diethylene glycol monomethyl ether solvents (PM-DGME), has been designed for Aerosol digital printing systems and low temperature sintering applications. The ink offers a unique combination of properties, including high silver loading, low viscosity, storage at ambient conditions, long shelf life, reliable jetting and good printability. Printed patterns, sinterable at low temperatures, provide low electrical resistivity, good adhesion to a wide range of substrates and durability to humid and aqueous environments.
This product can be stored at room temperature.

  • Compatible printheads
Ink works well with printheads: Air Brush
  • Product fit for:
Digital Printing (Aerosol)
Printed Electronics: FPD, RFID, PCB
Aerosol Jet can print conformal interconnects on 3D surfaces eliminating the need for wire bonding - for example printing electrical connections on 3D stacked die or for LED chip fabrication. Components can also be printed onto 3 dimensional surfaces eliminating the need for a separate substrate thereby reducing the size, thickness and weight of the end product. For example, Aerosol Jet is used to print antennas and sensors that conform to the shape of the underlying substrate such as a cell phone case. The Aerosol Jet process also supports printing on a wide variety of substrates including plastics, ceramics and metallic structures.

制备说明

Mix well before use.
Electrical Properties
Sintering conditions (on glass) :
UV followed by thermal (UV 9 W/cm2, 2 min (+), Thermal: 130℃/60 min)
Resistivity after sintering conditions mentioned above : ≤10 μΩ·cm (≤6 bulk)
Adhesion to (tested) :
Kapton, PC, PC/ABS, PA, glass
Reliability :
Adhesion survived below testing conditions (on glass):
soaking in NaCl 1M for 2 h
soaking in NaCl 1M for 2 h and in DI water for 20 h

法律信息

Lumisizer is a trademark of LUM GmbH

基本信息

线性分子式Ag

产品性质

组成Propylene glycol monomethyl ether - diethylene glycol monomethyl ether solvents (PM-DGME) (solvent)
Silver content, 60 wt. %
粒径分布100 nm (D90 by Lumisizer)
75 nm (D50)
表面张力, 23dyn/cm (Pendant Drop)
粘度26 cP (Brookfield, Cone Spindle 40, 25 ℃Brookfield, Cone Spindle 40, 25 ℃)
密度2.14 g/mL
储存温度15-25℃

安全信息

象形图GHS02GHS05GHS08GHS09
警示用语:Warning
危险声明H226 - H290 - H315 - H319 - H351 - H361d - H410
预防措施声明P202 - P210 - P273 - P303 + P361 + P353 - P305 + P351 + P338 - P308 + P313
危险分类Aquatic Acute 1 - Aquatic Chronic 1 - Carc. 2 - Eye Irrit. 2 - Flam. Liq. 3 - Met. Corr. 1 - Repr. 2 - Skin Irrit. 2
储存分类代码3 - Flammable liquids
WGKWGK 3
闪点(F)85.1 °F
闪点(C)29.5 ℃

Sigma-Aldrich

推荐产品